OBSOLETE

C22 EHO Food Thermometer Kit

Part No: C22EHOKIT (3613926)

£0.00 (ex. VAT)

The C22C (Environmental Health Officer) EHO Food Thermometer Kit comprises a C22C Food Thermometer as well as an AT22L Fast Response Flexible Wire Air Probe, an ST23L Between Pack Probe, a PT24L/C Food Penetration Probe, a PW70T pack of Probe Wipes and an MC28 Food Kit Carry Case to keep it all in.

  • Thermistor Temp. Range: -58°F to +300°F / -50°C to +150°C
  • Thermocouple Temp. Range: -328°F to +752°F / -200°C to 400°C
  • Exceptional Battery life of up to 14,000 Hours
  • Warranty: Please refer to individual components

C22C EHO Food Thermometer Kit

The C22C (Environmental Health Officer) EHO Food Thermometer Kit comprises a C22C Food Thermometer as well as an AT22L Fast Response Flexible Wire Air Probe, an ST23L Between Pack Probe, a PT24L/C Food Penetration Probe, a PW70T pack of Probe Wipes and an MC28 Food Kit Carry Case to keep it all in.

C22C Food ThermometerThe C22C Food Thermometer is designed for taking temperature measurements in a wide range of food applications in kitchens, contract catering through to food retail.
PT24L/C Food Penetration Probe

The PT24L/C Food Penetration Probe has BioCote Antimicrobial Protection in the probe handle to minimise the risk of cross contamination. It features a Thermocouple Type T sensor for a faster response time. The PT24L/C is fitted with a curly brown lead.

The ST23L Between Pack Probe (Thermocouple) is a general purpose surface probe designed for inserting between packs of food. It has a flat foil end in which the Thermocouple (Type T) sensor is located.
AT22L Fast Response Flexible Wire Air Probe

The AT22L Fast Response Flexible Wire Air Probe is a general purpose thermistor air probe designed for food applications, with a total length of 1.0m.

PW70T Thermometer Probe Wipes (70 Pack)

The PW70T Thermometer Probe Wipes (70 Pack) is a pack of 70 probe & surface disinfectant wipes supplied in a small portable dispenser.
MC28 Blue Medium Size Case

The MC28 Blue Medium Size Case is a hard carrying case specifically designed to take one thermometer and a range of probes.

 

Technical Specifications

NameValue
Measurement Range Thermistor-50°C to +150°C / -58°F to +302°F
Measurement Range Thermocouple Type T-200°C to +400°C / -328°F to +752°F
Environmental ProtectionIP65, Meets the requirements of DIN EN 13485:2002
Scales°C and °F
Displayed Resolution0.1° > -100° 1° <= -100°
Instrument Accuracy0.1% ±0.2°C / ±0.4°F full range @ +23°C Ambient
System Accuracy (Thermistor)At +23°C / +73°F
0°C to +70°C, +32°F to +158°F<±0.3°C / ±0.6°F
-25°C to 100°C, 13°F to +212°F±0.5°C / ±0.9°F
System Accuracy Type T*±0.5°C / ±0.9°F -25°C / -13°F to +100°C / +212°F @ +23°C Ambient
*When used with Comark Probe
Temperature Coefficient Thermistorless than ±0.005°C/°C (0.01°F per °F)
Temperature Coefficient Thermocoupleless than ±0.01 % of reading ±0.02 °C per °C (±0.04°F per °F) change from 23°C
Ambient Temperature Range-20°C / -4°F to +50°C / +122°F operating
Display4 digit, 12.5 mm LCD
BatteryTwo Type I.E.C. LR6 Size AA
Battery Life (continuous)Up to 14000 hours with thermistor probes, Up to 7000 hours with thermocouple probes
EMC EmissionTested to EN61326-1 Criteria B Performance
Length152mm / 6 inches
Width58mm / 2.3 inches
Depth22/27mm / 09./1.1 inches
Weight178g / 6.3 oz
WarrantyPlease refer to individual components

*You will need to Sign In to view additional content

Documentation

Articles / FAQs

NameDate
My Instrument reads OPEN (plus BAT in top of LCD)

My Instrument reads OPEN (plus BAT in top of LCD)

Comark ‘C’ series instruments incorporate a switch in the battery compartment to ensure that the Thermometer cannot be used if the integrity of the case is compromised and therefore ingress of liquid is possible,  that could lead to damage to the battery compartment or instrument.

Therefore if the Instrument reads OPEN on the Display and BAT is indicated, please ensure the battery compartment door is properly closed, by checking the following:

  • Check location of battery cover in slots in lower part of case; check they are not damaged or missing.
  • Check tightness of the screw in the battery compartment. Do not over tighten.

If OPEN message does not clear, please return for Service.

27th July 2015
My Instrument reads ambient all the time

My Instrument reads ambient all the time

Comark uses the Lumberg connector on many products due to its ruggedness and ability to perform multiple connecting duties. However, this can lead to some confusion, for example, when a Thermocouple Probe, with a Brown or Green lead, is plugged into an instrument designed to accept only a Thermistor/PST probe (for example C20, or C21C).

Doing this will cause no harm to the instrument, or the probe, but the probe will not work correctly and the display may well simply show Ambient Temperature reading.

To confirm if this probe is working correctly please try this probe in a C22 or N9094.

If you believe that the probe has been ordered in error please return the probe so we can arrange an exchange.

21st April 2015
How old is my Comark Product and is it still in Warranty?

How old is my Comark Product and is it still in Warranty?

The serial number on most Comark Products is usually the date of manufacture followed by a unique product number.

For example, 02121234 is (02) for February, (12) for year 2012, and (1234) is the number of the individual product.

This works for all C series Thermometers, Evt2 and N2000 Data Loggers, RF51X Transmitters, KM2xx, PxxxFW, BTxxx etc.

Warranty on most Comark Thermometers is 1 year. However, in reality Comark will give a little over the relevant warranty period to allow for distributor stock.

My device has corrosion in the battery compartment

My device has corrosion in the battery compartment

This may cause your device to cease functioning, or become dangerous. In all cases, please return your instrument to Comark for servicing.

FPP_010

Ideally, prevention is better than cure for this problem. Check your batteries regularly to ensure they have not leaked, and if you are planning to store the instrument without use for a prolonged period, please consider removing the batteries and storing them separately.

16th April 2015