Between Pack Probe

Part No: ST23L (3616316)

£0.00 (ex. VAT)

The ST23L Between Pack Probe is a general purpose surface probe designed for inserting between packs of food. It has a flat foil end in which the Type T Thermocouple sensor is located.

  • Temperature Range: -40°F to +158°F / -40°C to +70°C
  • Sensor Type: Type T Thermocouple
  • Connector Type: 6-Pin Lumberg
  • Warranty: 6 Months

 

Between Pack Probe

The ST23L Between Pack Probe is a general purpose surface probe designed for inserting between packs of food. It has a flat foil end in which the Type T Thermocouple sensor is located.

 

ST23L

 

The ST23L Between Pack Probe is fitted with a 6-Pin Lumberg connector with locking screw, to provide a strong and secure probe-to-instrument connection with better prevention of liquid ingress.

Technical Specifications

NameValue
Sensor TypeType T Thermocouple
Connector Type6-Pin Lumberg
Temperature Measurement Range-40°C to +70°C / -40°F to +158°F
Response Time5.0 seconds
Foil Width (Max)45mm
Lead Length1.0m
Lead MaterialPTFE
ComplianceThermocouples: Tolerances relate to BS EN60584-2 (1993) Class 1
Warranty6 Months

*You will need to Sign In to view additional content

Documentation

 CodeDescriptionIssue NoLast Modified
20534US Product Range Catalog0224th April 2017

Articles / FAQs

NameDate
My Probe is stuck in the Lumberg connector?

My Probe is stuck in the Lumberg connector?

If you are using a Probe, connected to your device via a 6-Pin Lumberg connector and the Probe appears to be stuck in the connector, then it may have been over-tightened.

You should initially try to release the screw thread connector gently.

To prevent the connector from locking in the future, you could use food safe grease on the connector threads. This problem may also be prevented by keeping the instrument clean when in use.

If this does not work, you will need to return your instrument for service.

 

20th April 2015