PX22L Food Penetration Probe (Thermistor/White)

Part No: PX22L (3060542)

£44.78 (ex. VAT)

The PX22L Food Penetration Probe (Thermistor/White) is a thermistor sensor probe designed for food applications. It has a 0.7m straight lead and white end cap. There is also BioCote Antimicrobial Protection in the probe handle to avoid the risk of cross contamination.

  • Temperature Range: -40°C to +150°C / -40°F to +302°F
  • Sensor Type: Thermistor (PST)
  • Connector Type: 6-Pin Lumberg
  • Warranty: 6 Months

 

PX22L Food Penetration Probe (Thermistor/White)
PX22L Food Penetration Probe (Thermistor/White)PX22L Food Penetration Probe (Thermistor/White)Lumberg 6-Pin Connector

Food Penetration Probe (Thermistor/White)

The PX22L Food Penetration Probe (Thermistor/White) is a Thermistor Sensor probe designed for food applications. It has a 0.7m straight lead and BioCote Antimicrobial Protection in the probe handle to minimise the risk of cross contamination.

 

PX22L_02_Diagram

 

The PX22L has a white end cap, but coloured end caps are also available to incorporate into HACCP procedures.

Options available:

  • PX22L – White
  • PX23L – Red
  • PX24L – Green
  • PX25L – Blue

The PX22L Food Penetration Probe is fitted with a 6-Pin Lumberg connector with locking screw, to provide a strong and secure probe-to-instrument connection with better prevention of liquid ingress.

Not suitable for intrinsically safe applications

Technical Specifications

NameValue
Sensor TypeThermistor (PST)
Connector Type6-Pin Lumberg
Temperature Range-40°C to +150°C / -40°F to +302°F
System Accuracy with Comark Thermometers±0.5°C -20°C to +70°C / ±0.9°F -4°F to +158°F
Response Time5.0 seconds
Stem Length100mm
Stem Diameter3.3mm
Lead Length0.7m
Lead MaterialFEP
Conformance to EU Regulation 1935/2004 ('Framework' Regulation on all Food Contact Materials)Yes
Stem (Shaft) Material316L Stainless Steel
Warranty6 Months

*You will need to Sign In to view additional content

Documentation

*You will need to Sign In to view additional content

Articles / FAQs

NameDate
My Probe is stuck in the Lumberg connector?20th April 2015
General Care of Temperature Probes20th April 2015