Intrinsically Safe Pressure Meter 0-to-±350mbar

Part No: C9503/IS (3059258)

£412.48 (ex. VAT)

The Comark C9503/IS Intrinsically Safe Pressure Meter 0-to-±350mbar / Intrinsically Safe Manometer 0-to-±350mbar combines high accuracy with speed of response and is ATEX compliant and designed for use in areas where explosive or flammable substances are stored or processed.

  • Pressure Measurement Range: 0-to-±350 mBar
  • Twin Inputs for Gauge or Differential Pressure
  • Pressure units: PSI, mbar, inH2O, mmHg, torr, Pa, mmH2O
  • Warranty: 2 Years

 

C9503/IS Intrinsically Safe Pressure Meter 0-to-± 350mbar

Intrinsically Safe Pressure Meter 0-to-±350mbar

The Comark C9503/IS Intrinsically Safe Pressure Meter 0-to-±350mbar / Intrinsically Safe Manometer 0-to-±350mbar combines high accuracy with speed of response and is designed to function between 0 to ±350mbar. The C9503/IS Intrinsically Safe Manometer has twin inputs for gauge or differential pressure measurement. With a durable design to survive an industrial setting, the Intrinsically Safe Pressure Meter 0-to-±350mbar is dust and waterproof to IP67 Standard (BS EN 60529), and an optional protective rubber boot is also available.

Our Intrinsically Safe Pressure Meters contain impregnated protection, designed to limit electrical discharge as well as the surface temperature of the device, in order to prevent the possible ignition of a volatile gases, dust or vapours.

The Comark range of Intrinsically Safe Manometers are ATEX compliant, certified to Ex II 1G Ex ia IIC T4 Ga and Baseefa03ATEX0079 and are therefore recommended for use in areas where explosive or flammable substances are stored or processed. These pressure meters have been approved by internationally recognised approval bodies to intrinsic safety requirements.

 


C9503/IS Intrinsically Safe Pressure Meter 0-to-± 350mbar


 

BENEFIT FROM THESE HANDY FEATURES

 

Ultra-Tough Housing

ULTRA-TOUGH HOUSING

IP67 rated ultra-tough case with optional protective rubber boot for demanding environments

Twin Inputs

TWIN INPUTS

for gauge and differential pressure measurements using 1/8″ BSP female connectors

2-Year Warranty

2-YEAR WARRANTY

this thermometer comes with our no-quibble warranty for complete peace of mind

Auto Switch-Off

AUTO SWITCH-OFF FEATURE

providing you with peace of mind usage, allowing you to focus on the task at hand

 

9V Battery Included

STRONG BATTERY LIFE

up to 125 hrs of continuous use from a single 9V PP3 6F22 battery (supplied)

ATEX CERTIFIED

for use in areas where explosive or flammable substances are stored or processed

Tubing And Connectors

TUBING & CONNECTORS

supplied with 4 x 1/8″ BSP nylon washers, 1.4m polyurethane tube and 2 x male stud coupling c/w washer

Multi-Function Intrinsically Safe Pressure Meter 0-to-±350mbar

MULTI-FUNCTION

offers functions to show maximum pressure, minimum pressure, reading hold and averaged reading

 

What is ATEX?

ATEX is the name commonly given to the two European Directives for controlling explosive atmospheres:

1) Directive 99/92/EC (also known as ‘ATEX 137’ or the ‘ATEX Workplace Directive’) on minimum requirements for improving the health and safety protection of workers potentially at risk from explosive atmospheres. The text of the Directive and the supporting EU produced guidelines are available on the EU-website. For more information on how the requirements of the Directive have been put into effect in Great Britain see the information in the section Explosive atmospheres in the workplace below.

2) Directive 94/9/EC (also known as ‘ATEX 95’ or ‘the ATEX Equipment Directive’) on the approximation of the laws of Members States concerning equipment and protective systems intended for use in potentially explosive atmospheres. The text of the Directive and EU produced supporting guidelines are available on the EU website. For more information on how the requirements of the Directive have been put into effect in Great Britain see the section on Equipment and protective systems intended for use in explosive atmospheres

Source: http://www.hse.gov.uk

 
 

Technical Specifications

NameValue
Pressure Measurement Range0 to ±350 mBar
Resolution0.1mBar
Accuracy±0.2% of full scale (FS) at +23°C
Repeatability±0.1% of full scale (FS) at +23°C
Mean Temperature Coefficient of Reading<0.1% per °C
Operating Temperature Range0 to 50°C
Humidity Range10 to 90% RH non-condensing
EMCTested to EN61326-1 Criteria B performance
Environmental ProtectionIP67, BS:EN60529, IEC529
Battery9V PP3 *6F22 — 6F22REL or GP1604G
125 hours
*IS models must only use Zinc Chloride Battery
Low Battery WarningDisplays BAT just before end point of battery
Over Pressure Indication– – – –
Over 9999 Reading IndicationLowest 4 digits blink
Connections1/8" BSP female
Dimensions175 x 82 x 32mm
Weight330gm including battery
Warranty2 Years

Articles / FAQs

NameDate
My device has corrosion in the battery compartment 16th April 2015