PST Air Probe (1.0m Lead)

Part No: RFAX100 (3359435)

£59.90 (ex. VAT)

The RFAX100 PST (Thermistor) Air Probe is a damped air probe for use with the RF500 Wireless Monitoring System. The probe is connected to a 1.0m lead.

  • Temperature Range: -40 to +70°C / -40°F to +158°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: Lumberg (6-Pin)

RFAX100 PST Air Probe (1m Lead)

PST Air Probe (1.0m Lead)

The RFAX100 PST (Thermistor) Air Probe is a damped air probe for use with the RF500 Wireless Monitoring System. The probe is connected to a 1.0m lead.

RFAX100-1024x181

 

The RFAX100 PST Air Probe is fitted with a 6-Pin Lumberg connector with locking screw, to provide a strong and secure probe-to-instrument connection with better prevention of liquid ingress.


Air Probes Explained

It is fair to say, that any probe that can measure temperature, could be used as an Air Probe, with varying degrees of success. However, Air Probes are specifically designed for this purpose and so have a higher degree of accuracy and response.

Air Probes are often designed to be very quick response with a low thermal mass. The sensor is designed to be as small as possible so that the air temperature is transferred to the probe with minimal temperature loss or gain to maintain a high degree of accuracy.

That said, all Comark Air Probes for RF500 are inherently designed to be slow. Why is this? Read on to find out….

We supply a Damped Air Probe style for the RF500 Wireless Monitoring System, which comes in the form of a small stainless steel bullet shaped end, see picture.

Damped_Air_Probe_Lumberg_Diagram

This type of construction has two purposes;

  • It protects the sensor from physical damage
  • It slows the response of the probe down significantly

In certain scenarios, it is beneficial to have a slower response to changes in air temperature, hence having aDamped Air Probe. For example, when you place a probe inside a fridge or freezer, you probably don’t want an alarm going off every time someone opens the door.

The Damped Air Probes do a good job of reflecting the samples in the fridge. As the RF500 Wireless Monitoring System is your early warning notification for any alarms, it would be unsuitable if ‘false alarms’ were constantly being raised.

All RF500 System Air Probes are fitted with a 6-Pin Lumberg Connector and a stainless steel Damped Air Probe end, as shown below.

Lumberg_6_Pin_01Damped_Air_Probe_Tip_01

 

Technical Specifications

NameValue
Lead Length1.0m
Connector TypeLumberg (6-Pin)
Sensor TypePST (Thermistor)
Stem Length30mm
Stem Diameter8mm
Temperature Range-40 to +70°C / -40°F to +158°F
Wire TypeFlat-Twin
Lead MaterialPVA

*You will need to Sign In to view additional content

Articles / FAQs

*You will need to Sign In to view additional content

Part No: RFAX1000 (3359464)

PST Air Probe (10.0m Lead)

The RFAX1000 PST (Thermistor) Air Probe is a damped air probe for use with the RF500 Wireless Monitoring System. The probe is connected to a 10.0m lead.

  • Temperature Range: -40 to +70°C / -40°F to +158°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: Lumberg (6-Pin)

Part No: RFAX600 (3618140)

PST Air Probe (6.0m Lead)

The RFAX600 PST (Thermistor) Air Probe is a damped air probe for use with the RF500 Wireless Monitoring System. The probe is connected to a 6.0m lead.

  • Temperature Range: -40 to +70°C / -40°F to +158°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: Lumberg (6-Pin)

Part No: RFAX500 (3359458)

PST Air Probe (5.0m Lead)

The RFAX500 PST (Thermistor) Air Probe is a damped air probe for use with the RF500 Wireless Monitoring System. The probe is connected to a 5.0m lead.

  • Temperature Range: -40 to +70°C / -40°F to +158°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: Lumberg (6-Pin)

Part No: RFAX200 (3618125)

PST Air Probe (2.0m Lead)

The RFAX200 PST (Thermistor) Air Probe is a damped air probe for use with the RF500 Wireless Monitoring System. The probe is connected to a 2.0m lead.

  • Temperature Range: -40 to +70°C / -40°F to +158°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: Lumberg (6-Pin)

Keep up to date!

Sign up for our newsletter