CMACC
Oracle Product Category for Distributor Discount Structure
-
A16635
Pressure Tubing and Connectors
Pressure Tubing and Connectors designed for use with C95xx Pressure Meters. This part is designed to replace the connection kit provided with all Comark Pressure Meters.
Contains:
- 4 x 1/8″ BSP Nylon Washers
- 2 x Male Stud Coupling c/w Washer
- 1.4m Polyurathane Tube SP Blue
-
A17476
Diligence EV Battery Kit
The A17476 Diligence EV Battery Kit contains a lithium battery, designed for use with N2000 series data loggers, as well as a new rubber seal for the battery housing.
- Designed for N2xxx Data Loggers
- Battery Type: 3.6 V Lithium Battery (Li-SOCl2)
- New Rubber Seal Included
-
C20WB
Wall Bracket/Stand
The C20WB Wall Bracket/Stand is designed for all Cxx Series Food Thermometers.
- BioCote® antimicrobial protection
- Integrated Probe Holder
- Rugged Plastic Construction
-
ADP50
ADP50 Adapter Cable
The ADP50 Adapter Cable allows you to connect N2015 Data Loggers to a third party sensor transmitter.
- Connector Type : 6-Pin Lumberg
- Cable Length: 280mm
- Designed for 3rd Party Connections
-
AC415
Soft Carry Case
The Soft Carry Case AC415 is designed for the KM28B Thermocouple Food Thermometer.
- Designed for use with KM28B
- Supplied with Carry Strap
- Durable Construction
-
TX27L
Thermometer Test Cap (+32°F)
The TX27L Thermometer Test Cap (+32°F) with 6-pin Lumberg type connector for simulation of temperature of +32°F.
- Temperature simulation on Thermometers
- 6-pin Lumberg Connector
- Sensor Type: Thermistor
-
CRS/5
Protective Rubber Boot
The CRS/5 Protective Rubber Boot is specifically designed for the KM28B Thermocouple (Type K) Food Thermometer.
- Durable Rubber Construction
- Built-in Probe Rest
- Sung Fit
-
11068
Long Clip for T220/38A and T550/38A
The 11068 Long Clip for T220/38A and T550/38 is designed as a replacement part accessory for Dial Thermometers that come fitted with similar as standard, should it ever need to be replaced.
- Stainless Steel Construction
- Designed for 20cm / 8″ Stemmed Pocket Dials
- Replacement Part
-
MC28
Blue Medium Size Case
The MC28 Blue Medium Size Case is a hard carrying case specifically designed to take one thermometer and a range of probes.
- Hard Plastic Case
- Twin Closure Clips
- Pre-Shaped Foam Insert
-
PW180TA
Thermometer Probe Wipes (180 Pack)
The PW180TA Thermometer Probe Wipes (180 Pack) is a pack of 180 alcohol cleaning thermometer probe wipes supplied in a small portable dispenser.
- Designed for use with Comark Probes
- Pop-up design dispenses one wipe at a time
- Stay safe with Comark Probe Wipes
-
SC22
Small Carry Case
The SC22 Small Carry Case is perfectly suited to your Cxx Series Thermometers.
- Hard Plastic Case
- Twin Closure Clips
- Pre-Shaped Foam Insert
-
PW70TA
Thermometer Probe Wipes (70 Pack)
The PW70TA Thermometer Probe Wipes (70 Pack) is a pack of 70 alcohol cleaning thermometer probe wipes supplied in a small portable dispenser.
- Designed for use with Comark Probes
- Pop-up design dispenses one wipe at a time
- Stay safe with Comark Probe Wipes
-
AB13
Replacement Battery (AB13/LR44)
The AB13 Replacement Battery is sold in packs of two and is suitable for use in a number of Comark products.
- Twin Pack
- 1.5v
- Calculator Battery Type (LR44)
-
MC33
Carrying Case for KM330/KM340
The MC33 Carrying Case for KM330/KM340 is a hard carrying case designed to hold either the KM330 Industrial Thermometer or the KM340 Industrial Thermometer.
- Hard Plastic Case
- Twin Closure Clips
- Pre-Shaped Foam Insert
-
MC20
Blue Medium Size Case
The MC20 Blue Medium Size Case is a hard carrying case designed to hold the KM820/VAL Validator Calibration Check Unit and KM20REF High Accuracy Reference Thermometer to make up the KM820/VKIT Validator Calibration Check Kit.
- Hard Plastic Case
- Twin Closure Clips
- Pre-Shaped Foam Insert
-
AC315
Soft Carry Case
The Soft Carry Case AC315 is designed for small handheld thermometers including the C Series, KM28B and KM330 Food Thermometers.
- Designed for use with KM28B, C2x, KM330/340
- Supplied with Carry Strap
- Durable Construction
-
CRS/6
Protective Rubber Boot
The CRS/6 Protective Rubber Boot is compatible with N5000 and N9000 Series instruments. It features a built-in probe rest and carry strap.
- Durable Rubber Construction
- Built-in Probe Rest
- Carry Strap
-
MC32
Hard Carrying Case
The MC32 Hard Carrying Case is specifically designed to take one C22 or C28 Thermometer and a range of probes.
- Hard Plastic Case
- Twin Closure Clips
- Pre-Shaped Foam Insert
-
CRS/1
Protective Rubber Boot
The CRS/1 Protective Rubber Boot is designed specifically for the C95xx Range of Pressure Meters.
- Durable Rubber Construction
- Snug fit
- Carry Strap
-
SVTAPE
Sous Vide Foam Tape
This specially made Sous Vide Foam Tape is designed for use with all types of temperature probes and vacuum pouches.
- 1.0m length of Sous Vide Tape
- FDA Approved
- Temperature Range: -58°F to +392°F / -50°C to +200°C
-
MC95
Carry Case for Pressure Meters
The MC95 Carry Case for Pressure Meters has been specifically designed for C95xx Pressure Meters with space for the accessories, such as tubing and connectors.
- Hard Plastic Case
- Twin Closure Clips
- Pre-Shaped Foam Insert