RF Alarm Output Jack

Part No: RFJACK (3618157)

The RFJACK is a 2.5mm jack that can be connected to a custom length of figure of eight wire as an alternative to the 2m Alarm Output Lead (RFALARM).

  • Designed for Relay Outputs of Gateways
  • Connect External Devices to Gateway (via custom length cable)
  • 2.5mm Jack Plug Included
RFJACK RF Alarm Output Jack

RF Alarm Output Jack

The RFJACK is a 2.5mm jack that can be connected to a custom length of figure of eight wire as an alternative to the 2m Alarm Output Lead (RFALARM).

The finished cable, to your length requirement, will then allow you to connect to the two relay outputs on a RF500A/AP Gateway device, as each accepts a 2.5mm jack plug. These are individually controlled SPST relay contacts.

The RFJACK effectively allows you to wire to custom lengths, your external equipment* to be activated by the Gateway.

*Ensure that any external equipment presents only a low voltage on the jack so as to prevent any chance of personal injury due to electric shock should the jack plug become disconnected.

*You will need to Sign In to view additional content

*You will need to Sign In to view additional content

Part No: RFALARM (3618464)

RF Alarm Output Lead (2m)

The A18408 (RFALARM) is a 2m Alarm Output Lead made of figure of eight wire, terminated with a 2.5mm jack.

  • Designed for Relay Outputs of Gateways
  • Connect External Devices to Gateway
  • 2.5mm Jack Plug Included

Keep up to date!

Sign up for our newsletter