Heavy Duty General Purpose Surface Probe
Part No: SK24M (3060678)£0.00 (ex. VAT)
The SK24M Heavy Duty General Purpose Surface Probe is a general purpose, but heavy duty surface probe suitable for measuring high temperatures up to +650°C, fitted with a 1m curly cable.
- Temperature Range: -58°F to +1202°F / -50°C to +650°C
- Sensor Type: Type K Thermocouple
- Connector Type: 2-Pin Sub-Miniature
- Warranty: 6 Months
Heavy Duty General Purpose Surface Probe
The SK24M Heavy Duty General Purpose Surface Probe is a general purpose, but heavy duty surface probe suitable for measuring high temperatures. It is ideal for measuring surface temperatures of up to +650°C, fitted with a 1m curly cable.
The SK24M Heavy Duty General Purpose Surface Probe is fitted with a 2-Pin Sub-Miniature connector, to provide a quick and easy connection to your Thermometer.
Technical Specifications
Name | Value |
---|---|
Sensor Type | Type K Thermocouple |
Connector Type | 2-Pin Sub-Miniature |
Temperature Range | -50°C to +650°C / -58°F to +1202°F |
Response Time | 0.4 seconds |
Stem Length | 100mm |
Stem Diameter | 10mm |
Lead Length | 1.0m |
Lead Material | PVC (Curly) |
Compliance | Thermocouple: Tolerances relate to BS EN60584-2 (1993) Class 1 |
Warranty | 6 Months |
*You will need to Sign In to view additional content
Documentation
Code | Description | Issue No | Last Modified | |
---|---|---|---|---|
EU DoC | EU Declaration of Conformity (SK Probes) | 01 | 20th April 2016 |
Articles / FAQs
Name | Date |
---|---|
General Care of Temperature ProbesGeneral Care of Temperature ProbesThe Probe is where most of the action with any Thermometer takes place. Almost every operation requires a Probe reading. The Probe should be treated with care in order to ensure best functioning and long life. We would recommend that you always have a spare, properly functioning Probe on hand, just in case the primary Probe breaks, or appears to be reading incorrectly. You should not stretch the coiled cable of any Probe, to reach an item to be measured. We would recommend instead that you ALWAYS move BOTH the Probe and the Thermometer, toward the food to be measured. This will help avoid unnecessary stress on the wires inside the Probe. You should not touch the coiled cable or Probe handle to hot surfaces, that might melt the protective coatings, which in turn could damage the Probe wires and render the Probe inoperable. You should not bend the tip of any Penetration Probe, as this too could break the wires and render the Probe inoperable. In general, Penetration Probes are designed for penetrating thawed food only and not for testing frozen food or containers or chipping ice. You should clean the Probe and wire coil with a clean damp cloth, being VERY careful not to pull or stretch the coil and damage the wires inside. | 20th April 2015 |
Related products
- KM340
KM340 Industrial Thermometer (Type K)
More Info - KM330
KM330 Industrial Thermometer (Type K)
More Info - SK21M
General Purpose Fast Response Surface Probe
£0.00 (ex. VAT) More Info - N9005
N9005 Industrial Thermometer
More Info