Glycol Simulant WiFi Data Logger

Part No: RF312Glycol (4808972)

£241.95 (ex. VAT)

The RF312Glycol Glycol Simulant WiFi Data Logger (with detachable buffer probe) is designed specifically for use in monitoring the temperature of perishable items, such as food, samples and vaccines. Data is transmitted wirelessly via your WiFi network to the Comark Cloud.

  • Temperature range: -40°C to +60°C / -40°F to +140°F
  • Simple installation using existing WiFi network
  • Supplied with high accuracy glycol buffer probe, USB Lead and wall bracket
  • Comark Cloud charges apply
  • Warranty: 1 year

 

RF312Glycol Diligence WiFi Glycol Simulant Data Logger

Glycol Simulant WiFi Data Logger

The RF312Glycol Diligence WiFi Glycol Simulant Data Logger (detachable buffer probe) is designed specifically for use in monitoring the temperature of perishable items, such as food, samples and vaccines.

The high accuracy data logger is typically accurate to ±0.2°C* (-15°C to +80°C) / ±0.4°F (+5°F to +176°F). Data is streamed wirelessly over any WiFi network and can be viewed from anywhere, using the Comark Cloud.

*Using the supplied Glycol Probe

The Glycol Buffer Probe is designed to provide a buffered response to changes in temperature. This helps to simulate the thermal lag experienced by products stored in the monitored environment.

Note: The Glycol probe supplied is compatible with this logger and the RF312DUALPLUS, it is not compatible with the RF312-TP logger. If you require an Air probe for use with this logger, please see the Probes and Accessories sections below.This logger is compatible with the regular RFAXxxxJ probes with the following accuracy specifications ±0.3°C (0°C to +70°C) / ±0.6°F (+32°F to +158°F).

Setup your loggers quickly and easily with the free PC software, after which all configuration is handled from the Cloud. See the Downloads section, under the Support Tab.

If the data logger temporarily loses connectivity with the network, it will log readings until the connection is re-established (max 30 days at 10 second sample interval).

The Comark Cloud Dashboard is your new online Home for your Loggers and provides easy access to the critical information regards your system, including; the status of your favourite devices at a glance, review recent device events, view data and clear alerts, quickly navigate to the detail on all your devices.

Simply log on to the Comark Cloud Dashboard via your PC, Tablet or Phone.

Although the Diligence WiFi data loggers have an impressive range this can be increased by using WiFi extenders.

The RF312Glycol Diligence WiFi Glycol Simulant Data Logger with a GLYCOL Probe, is a low power device containing a rechargeable battery. When configured, the data logger can operate for up to six months*. The battery can be recharged via a standard +5V wall adapter RF320 (UK/US) or a USB port using the cable provided.

The LCD display includes several features including Max and Min readings and indicators for low battery, alarms, WiFi connection and signal strength. The RF312GLYCOL has a protection rating of IP42 and the glycol probe, IP67. The RF312GLYCOL is freestanding, but can be attached to a wall or surface using the bracket provided. The glycol buffer probe is supplied with a detachable magnetic base for easy installation.


Diligence_Wifi_Logo

From the Comark Cloud Dashboard you can change the data logger’s settings to suit your needs, options include;

  • Assigning names to the data logger and each measuring channel
  • Selecting the units of measurement
  • Choosing the sample rate and transmission period
  • Setting high and low alarm levels for each channel
  • Manage Users and Locations

Enjoy an Audit Trail, with detailed reporting, data exporting and notification options, including e-mails and SMS**

The RF312Glycol has a protection rating of IP40 and the probes IP67. The data logger is IEEE 802.11b/g/n compliant, supports WEP, WPA/WPA2 encryption and enterprise networks***.


Features

  • High Accuracy Glycol Buffer Probe Temperature Measurement range -40 to +60°C / -40°F to +140°F
  • Rechargeable internal lithium polymer battery
  • Wirelessly stream and view data on the Comark Cloud
  • Initial set-up of the data loggers via the free, easy-to-use PC software application
  • View and analyze multiple data loggers, including graphing of historic data
  • Configurable high and low alarms with indicator
  • Data Logger memory stores data even if WiFi is temporarily disconnected
  • Fully featured LCD display
  • Simple, single button operation
  • Low battery indicator
  • WiFi connection indicator
  • USB port used for recharging (can only be recharged when the unit is between 0 to +40°C / +32 to +104°F)
  • Supplied with removable High Accuracy GLYCOL probe, micro USB lead and Wall Bracket

*** MS-CHAPv2, PEAP, EAP-FAST, EAP-TTLS

**SMS via E-mail to SMS service such as TextMagic™ (www.textmagic.com)

*Battery Life and Power Supply
The product will arrive partly charged, but ideally you should charge it for 24 hours before use for optimum performance. The battery can be recharged (unit must be between 0°C to +40°C / +32°F to 104°F) via a PC, a USB +5V wall adapter RF320 (UK/US), or a portable USB battery pack using the USB lead provided. It can also be permanently powered by the RF320 USB wall adapter. Readings may be affected while the internal battery is being charged. However, once charged, continued connection of the charger will have no effect.

Battery life is dependent on: transmission period, WiFi encryption method, WiFi encryption key rotation frequency (determined by the router/access point), signal strength between router/access point and WiFi device, presence volume and type of WiFi traffic from other devices, sample rate and operating temperature.

For more information on Battery and WiFi Considerations please read our Product Information Bulletin for RF300.

Please contact us if you want more information on the battery life of RF300 Transmitters and how to maximise it.
 
Apply for a Comark Cloud Account Today!
 

Technical Specifications

NameValue
Sensor TypeHigh Accuracy ‘PLUS’ Specification Thermistor
Battery LifeTypically *3-6 Months
USB Supply Voltage4.5 to 5.5 Vdc
Operating Temperature Range-20°C to +60°C / -4°F to +140°F
Logging Period (User Configurable)10 Seconds to 12 Hours (Typical 10 Minutes)
Transmission Period (User Configurable)1 minute to 24 hours (Typical 1 Hour)
Temperature Measurement Range-40 to +60°C / -40°F to +140°F
Temperature Measurement Resolution0.01°C / 0.01°F
Temperature Display Resolution0.01°C / 0.01°F
System Temperature Accuracy (-10 to +60°C)±0.1°C
System Temperature Accuracy (+14°F and +140°F)±0.2°F
System Temperature Accuracy (-40 to +60°C)±0.6°C
System Temperature Accuracy (-40°F to +140°F)±1.1°F
Logger DimensionsHeight 82mm / 3.23" x Width 70mm / 2.75" x Depth 22mm / 0.86"
Supplied Glycol Buffer Probe Lead Length3m
WiFi ComplianceIEEE 802.11b/g/n compliant, supports WEP, WPA/WPA2 encryption and enterprise networks (MS-CHAPv2, PEAP, EAP-FAST, EAP-TTLS)
Glycol Buffer Response Time (t90*)40 minutes
*The t90 response is the time taken for the temperature probe to achieve 90% of the ambient temperature, after being subjected to an instant change. This response time is designed to reproduce the thermal characteristics of a vaccine vial, accurately tracking the temperature of the vaccine.
Warranty1 Year

Articles / FAQs

NameDate
Help with Troubleshooting Common Issues 7th December 2016
Help checking my comark.wifisensorcloud.com Server Settings 27th March 2015
Help with Restart or Factory Reset 27th March 2015
Help with updating the firmware of my RF300 Data Loggers 27th March 2015
Help with Completely uninstalling the Diligence WiFi Sensor Software 27th March 2015
Help with finding the Firmware Version of your RF300 Data Logger 27th March 2015
Help with McAfee All Access Software 27th March 2015
Help with Network Requirements and Settings 26th March 2015
Help with Windows Firewall 26th March 2015
Help with Symantec Firewall 26th March 2015
Help with ZoneAlarm Firewall 26th March 2015
Battery Life Expectation 24th March 2015