FPP – Food Pro Plus

Part No: FPP (3615208)

£120.70 (ex. VAT)

The FPP Food Pro Plus for infrared temperature measurement has a countdown timer and a flip-down Thin-Tip penetration probe.

  • Infrared Temperature Range: -35°C to +275°C / -30°F to +525°F
  • Probe Temperature Range: -40°C to +150°C / -40°F to +302°F
  • Emissivity: Pre-set for food service applications


 

FPP Food Pro Plus

Food Pro Plus

The FPP Food Pro Plus for infrared temperature measurement has a countdown timer and a flip-down Thin-Tip penetration probe for more accurate confirmation of temperature where a potential problem has been identified, and comes complete with a carrying pouch. Target illumination shows measurement area so user can move closer for more accurate readings.

HACCP temperature danger zones indicated with clear safe/unsafe LED warnings:

  • Green – temperatures are within safety guidelines and outside danger zone
  • Red – warning – temperatures are inside the HACCP danger zone and potentially unsafe – HACCP danger zone set at +4°C to +60°C/ +40°F to +140°F

Features:

  • Scan Quickly scan temperatures without risk of cross-contamination
  • Probe Verify internal temperatures with flip down probe thermometer
  • Timer Set adjustable alarms for line check reminders
  • HACCP Check Indication lights instantly warn of potentially unsafe temperatures
  • Hand Washable Sealed to IP54 standards for long life expectancy and accuracy
  • Spot Illumination Target infrared measurements highlighted by LED
  • Scale °C/°F switchable
  • Extended Life Two year warranty standard for normal use

 


About HACCP

Food business need to conduct a hazard analysis of their food operations and implement suitable and sufficient controls to eliminate the risks posed by identified hazards. They will need a fully documented food safety management system based on HACCP (Hazard Analysis and Critical Control Point) principles.

Technical Specifications

NameValue
Working Range12mm to 300mm / 0.5in to 12in
Min Target Size12mm / 0.5in
Distance to Spot Ratio2.5 to 1
Target IlluminationHigh brightness LED
EmissivityPre-set for food service applications
Spectral Response8 to 14 microns
Measurement Range (Infra Red)-35°C to +275°C / -30°F to +525°F
Accuracy (IR) (0°C to +65°C)±1°C
Accuracy (IR) (32°F to +150°F)±2°F
Accuracy (IR) (below 0°C / +32°F)±1°C / ±2°F, ±0.1 degree/degree
Accuracy (IR) (above +65°C / +150°F)±1.5% of reading
Thin-Tip Probe SensorClass A Platinum thin film RTD
Measurement Range (Probe)-40°C to +150°C / -40°F to +302°F
Speed of ResponseUnder 8 seconds for 95% of responses
Probe Accuracy (-5°C to 65°C / 23°F to 150°F)±0.5°C / ±1°F
Probe Length78mm (3.2in)
Probe Diameter3mm stepped down to 1.5mm
Countdown Timer10 seconds to 7 hours, 59mins
Environmental ProtectionIP54
Ambient Operating Range0 to +50°C / +32°F to +122°F
Humidity at +30°C / +86°F90% (±5% RH)
Battery1 x 9V alkaline
Battery Life10 hours @ +23°C / +73°F
Weight With Battery150g / 0.33lbs
CertificationNSF Listed
Warranty PeriodTwo Years
Dimensions165mm / 6.5in W, 32mm / 1.25in W, 50mm / 2in D
Conformance to EU Regulation 1935/2004 ('Framework' Regulation on all Food Contact Materials)Yes
Stem (Shaft) Material316L Stainless Steel
Part No: FP-PROBE (2477961)

FP-PROBE – Replacement Probe for FPP

The FP-PROBE is the Replacement Probe for the Food Pro Plus (FPP) Infrared Thermometer. It is a thin-tip penetration probe that can be flipped down or stored away within the Food Pro Plus Thermometer housing.

  • Probe Length: 78mm (3.2in)
  • Probe Diameter: 3mm stepped down to 1.5mm
  • Probe Temperature Range: -40°C to +200°C (-40°F to +392°F)

Part No: PW70T (3060521)

Thermometer Probe Wipes (70 Pack)

The PW70T Thermometer Probe Wipes (70 Pack) is a pack of 70 anti-bacterial (bactericidal) thermometer probe wipes supplied in a small portable dispenser.

  • Designed for use with Comark Probes
  • Pop-up design dispenses one wipe at a time
  • Standards: BS EN1276:1997 / BS EN13697:2001

Part No: PW200T (3060517)

Thermometer Probe Wipes (200 Pack)

The PW200T Thermometer Probe Wipes (200 Pack) is a pack of 200 anti-bacterial (bactericidal) thermometer probe wipes supplied in a small portable dispenser.

  • Designed for use with Comark Probes
  • Pop-up design dispenses one wipe at a time
  • Standards: BS EN1276:1997 / BS EN13697:2001

*You will need to Sign In to view additional content

Part No: FP-PROBE (2477961)

FP-PROBE – Replacement Probe for FPP

The FP-PROBE is the Replacement Probe for the Food Pro Plus (FPP) Infrared Thermometer. It is a thin-tip penetration probe that can be flipped down or stored away within the Food Pro Plus Thermometer housing.

  • Probe Length: 78mm (3.2in)
  • Probe Diameter: 3mm stepped down to 1.5mm
  • Probe Temperature Range: -40°C to +200°C (-40°F to +392°F)

Part No: FP (3615173)

FP – Food Pro

The FP Food Pro Infrared Thermometer offers quick temperature checks for all food applications.

  • Infrared Temperature Range: -30°C to +200°C / -25°F to +400°F
  • Working Range: 12mm to 300mm / 0.5in to 12in
  • Emissivity: Pre-set for food service applications

 


Part No: KM814FS (3615236)

Infrared Food Thermometer with Laser Sighting

The KM814FS Infrared Food Thermometer with Laser Sighting is a pocket-sized infrared thermometer which is ideally suited to food industry HACCP requirements.

  • Temperature Range: -30°C to +200°C / -25°F to +400°F
  • Scales: °C and °F
  • Display Resolution: 0.2°C / 0.5°F

Keep up to date!

Sign up for our newsletter