Dishwasher Thermometer
Part No: KM14 (3851824)£0.00 (ex. VAT)
The KM14 Dishwasher Thermometer incorporates a stainless steel penetration probe and can be placed inside a commercial dishwasher to check cycle temperatures.
- Temperature Range: -4°F to +400°F / -20°C to +200°C
- Stem Length: 127mm / 5″
- Accurate to ±1°C / ±2°F
- For use in Commercial Dishwashers Only
- Warranty: 1 Year
Dishwasher Thermometer
The KM14 Dishwasher Thermometer incorporates a stainless steel penetration probe and can be placed inside a commercial dishwasher to check cycle temperatures are correct by using the maximum hold feature. A quick reading will show whether dishwasher operated at the correct temperature to sanitize equipment.
The KM14 Dishwasher Thermometer is multi-purpose and can also be used as a conventional food penetration probe thermometer. The KM14 Dishwasher Thermometer is a top performing digital thermometer that combines accuracy, speed of response and durability. Incorporates extended temperature range and max/min hold feature.
This Pocket Digital Thermometer combines accuracy with speed and durability. It was designed for use in commercial dishwashers, so it is completely waterproof and has a ‘Max Hold’ feature that allows you to verify the highest temperature record during the dishwasher cycle.
Features:
- Waterproof – For use in Commercial Dishwashers Only
- Field calibratable
- Auto power off
- Data hold button
- BioCote Antimicrobial Protection
- NSF Certified
Field Calibration Procedures
The KM14 Dishwasher Thermometer can be calibrated at any time and the procedure is quick and simple:
- Put some water and crushed ice into a clean mug or water bath (approx 60% crushed ice to 40% water).
- Insert the thermometer into the ice solution until the stem is covered to at least half way along its length.
- Wait for the reading to settle.
- Press and hold the D-H button for 8 seconds to begin calibration.
- “CAL” will be displayed on the LCD screen and calibration at 0°C will be complete.
Watch the ‘Slush Ice Thermometer Calibration’ Video by clicking on the ‘Knowledgebase’ tab (above).
Technical Specifications
Name | Value |
---|---|
Temperature Measurement Range | -20°C to +200°C / -4°F to +400°F |
Accuracy | ±1°C / 2°F |
Response Time | Under 6 Seconds |
Resolution | 0.1°C/F |
Stem Length | 127mm / 5" |
Probe Tip Diameter | 1.5mm |
Sample Time | 1.5 seconds |
Environmental Protection | BioCote Antimicrobial Protection |
Certification | NSF Listed |
Battery Type | 1.5 V Button Cell battery (Part no. AB13; LR44) |
Waterproof | Yes, to 3ft of water for 30 minutes |
Conformance to EU Regulation 1935/2004 ('Framework' Regulation on all Food Contact Materials) | Yes |
Stem (Shaft) Material | SUS304 Stainless Steel |
Warranty | 1 Year Limited |
*You will need to Sign In to view additional content
Documentation
*You will need to Sign In to view additional content
How-To Videos
Name | Date |
---|---|
Slush Ice Thermometer CalibrationSlush Ice Thermometer Calibration | 3rd March 2016 |
Related products
- 400YB
Digital Temperature Probe With Boot
£0.00 (ex. VAT) More Info - PDT300
Waterproof Pocket Digital Thermometer
£0.00 (ex. VAT) More Info - DT400Y
Pocket Thermometer With Thin Tip Probe
£0.00 (ex. VAT) More Info - 300
300 Digital Temperature Probe
£0.00 (ex. VAT) More Info - DT400
Pocket Thermometer With Thin Tip
£0.00 (ex. VAT) More Info - 300B
Digital Temperature Probe With Boot
£0.00 (ex. VAT) More Info - PDQ400
Waterproof Pocket Digital Thermometer
£0.00 (ex. VAT) More Info
- AB13
Replacement Battery (AB13/LR44)
£0.00 (ex. VAT) More Info