WiFi Temperature Data Logger with Thermistor ProbePart No: RF312-TP (4365202)
£122.00 (ex. VAT)
The RF312-TP Diligence WiFi Temperature Data Logger with Thermistor Probe for measuring temperatures, comes complete with a Thermistor Probe.
- Temperature Range: -40 to +125°C / -40 to +257°F
- Plug & Play Installation using existing WiFi Network
- Supplied with removable Thermistor Probe and Micro USB lead and Wall Bracket
- Warranty: 1 Year
WiFi Temperature Data Logger with Thermistor Probe
The RF312-TP Diligence WiFi Temperature Data Logger with Thermistor Probe is for measuring temperatures. It comes complete with a removable Thermistor Probe.
Data is transmitted wirelessly via a WiFi network to a PC and viewed via the Graphing Tool or can be exported to Microsoft Excel.
The Software installed on the PC will allow set up, data logging and data review. Set up features will include Data Logger name, °C / °F, sample rate, and high/low alarms. This Software is available to download for free.
The RF312-TP Diligence WiFi Temperature Data Logger with Thermistor Probe is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the Data Logger will operate for over one year. The battery can then be recharged via a PC or by mains power using the RF320 (UK/US) Power Supply Unit, which is available as an accessory.
- Measurement range -40 to +125°C / -40 to +257°F
- Rechargeable internal lithium polymer battery
- Easy data logger set-up using free PC Software application
- Temperature data logger with thermistor probe
- Temperature selection in °C or °F
- Data can be viewed via the graphing tool or can be exported to MS Excel
- Configurable high and low alarms with indicator
- Wireless connectivity to PC via WiFi
- Max and Min readings
- IEEE 802.11b/g/n compliant
- Protection rating IP55
- Capable of logging greater than 1 million data entries
- Memory stores all data even if WiFi is temporarily disconnected
- Fully featured LCD segment display
- Low battery indicator
- WiFi connection indicator
- USB port used for recharging (can only be recharged when the unit
is between 0 to +40°C / +32 to +104°F
- Supplied with removable thermistor probe, micro USB lead and Wall Bracket
Upgraded WiFi Loggers (July 2016)
Comark has upgraded the Diligence WiFi Data Logger range from ‘B’ (IEEE 802.11b) to ‘BGN’ (IEEE 802.11b/g/n) WiFi compatibility.
One of the major benefits of the switch to type ‘BGN’ WiFi is that it speeds network communications. IT departments in many schools and hospitals have been turning off ‘B’ compatibility to improve network speeds, so ‘BGN’ devices are often all that they will consider for new network devices.
Plus there are a number of other improvements to the Loggers:
New LCD on all Loggers
RF300 loggers now have a new two-Line LCD and a new LCD surround. The new segment battery indicator shows the charge on the battery all the time.
Improved Display Resolution
RF313-TH WiFi Temperature and Humidity Data Logger now shows temperature to 0.1°C & 0.1°F.
RF314-TC WiFi Temperature Data Logger with Thermocouple Probe now shows temperature to 0.1°C above 1000°C and below -100°C
How do I tell them apart from the old versions?
Telling them apart is straightforward. The part number for the logger can be found on the rear of the logger along with the MAC Address which, for all ‘BGN’ enabled products is 98:8B:AD:20:00:00 -> 98:8B:AD:2F:FF:FF
Still have questions or need advice?
Please contact us.
|Battery life||3-12 months depending on frequency of transmissions|
|USB supply voltage||5V (typical)|
|Probe temperature measurement range||-40 to +125°C / -40°F to +257°F|
|Probe temperature accuracy (-10 to +70°C)||±0.6°C|
|Probe temperature accuracy (+14°F and +158°F)||±1.1°F|
|Probe temperature accuracy (-40 to +125°C)||±1.0°C|
|Probe temperature accuracy (-40°F to +257°F)||±1.8°F|
|Probe clip operating temperature||-40 to +100°C / -40°F to +212°F|
|Logging rate (user configurable)||10 seconds to 12 hours|
|Transmission rate (user configurable)||1 minute to 12 hours|
|Logger Dimensions||Height 97.3mm / 4" x Width 71.3mm / 3" x Depth 26.36mm / 1"|
|WiFi Compliance||IEEE 802.11b/g/n compliant, supports WEP, WPA/WPA2 encryption and enterprise networks (MS-CHAPv2, PEAP, EAP-FAST, EAP-TTLS)|
*You will need to Sign In to view additional content
|Diligence WiFi Pro Software (for use with Comark Cloud)||1.30.62||51.35 MB||26th July 2016|
|RF312-TP Firmware||3.59||52.58 KB||3rd March 2015|
*You will need to Sign In to view additional content
Articles / FAQs
|Help with Troubleshooting Common Issues||7th December 2016|
|Help checking my comark.wifisensorcloud.com Server Settings||27th March 2015|
|Help with Restart or Factory Reset||27th March 2015|
|Help with updating the firmware of my RF300 Data Loggers||27th March 2015|
|Help with Completely uninstalling the Diligence WiFi Sensor Software||27th March 2015|
|Help with finding the Firmware Version of your RF300 Data Logger||27th March 2015|
|Help with McAfee All Access Software||27th March 2015|
|Help with Network Requirements and Settings||26th March 2015|
|Help with Windows Firewall||26th March 2015|
|Help with Symantec Firewall||26th March 2015|
|Help with ZoneAlarm Firewall||26th March 2015|
|Battery Life Expectation||24th March 2015|