OBSOLETE

Diligence WiFi Penetration Probe Plus (2m Lead)

Part No: RFPX200JPLUS (4380291)

The RFPX200JPLUS Diligence WiFi Penetration Probe Plus is a (High Accuracy 'Plus' Specification Thermistor) Penetration Probe for use with the RF312GLYCOL and RF312DUALPLUS Diligence WiFi Temperature Data Loggers.

  • Temperature Range: -40°F to +257°F / -40°C to +125°C
  • Sensor Type: PST (Thermistor)
  • Connector Type: 3.5mm Jack Plug
  • Warranty: 6 Months

 

Diligence WiFi Penetration Probe Plus

The RFPX200JPLUS Diligence WiFi Penetration Probe Plus is a (High Accuracy ‘Plus’ Specification Thermistor) Penetration Probe for use with the RF312GLYCOL and RF312DUALPLUS Diligence WiFi Temperature Data Loggers only. The probe is connected to a 2.0m lead.

 

 

rfpx200j

 

The RFPX200JPLUS Diligence WiFi Penetration Probe is fitted with a 3.5mm Jack Plug connector, to provide a quick and easy connection to your Data Logger.


Penetration Probes Explained

All of the Penetration Probes for the RF312xx Diligence WiFi Temperature Data Logger are designed to be robust, yet at the same time unobtrusive. That is why the standard Penetration Probes for RF312xx do not come with probe handles.

The Penetration Probes for RF312xx Diligence WiFi Temperature Data Logger, come in the form of a stainless steel pointed shaft, as shown below.

RFPX200_Edit

The Penetration Probes are designed to be inserted into samples so that the temperature recorded will accurately represent the sample. However, unlike the Air Probes, the Penetration Probes potentially are destructive to the sample, i.e. it cannot be used as intended.

All RF300 Diligence WiFi Penetration Probes are fitted with a 3.5mm-Jack Plug Connector and a stainless steel Pointed Penetration End end, as shown below.

RF Alarm Output JackProbe Tip

Technical Specifications

NameValue
Lead Length2.0m
Connector Type3.5mm Jack Plug
Sensor TypePST (High Accuracy 'Plus' Specification Thermistor)
Stem Length75mm
Stem Diameter4mm
Temperature Range-40°C to +125°C / -40°F to +257°F
System Accuracy with Comark Thermometer±0.5°C -20°C to +70°C / ±0.9°F -4°F to +158°F
Wire TypeFlat-Twin
Lead MaterialPVA
Warranty6 Months

Articles / FAQs

Name Date
General Care of Temperature Probes

General Care of Temperature Probes

The Probe is where most of the action with any Thermometer takes place. Almost every operation requires a Probe reading.  The Probe should be treated with care in order to ensure best functioning and long life.

We would recommend that you always have a spare, properly functioning Probe on hand, just in case the primary Probe breaks, or appears to be reading incorrectly.

You should not stretch the coiled cable of any Probe, to reach an item to be measured. We would recommend instead that you ALWAYS move BOTH the Probe and the Thermometer, toward the food to be measured. This will help avoid unnecessary stress on the wires inside the Probe.

You should not touch the coiled cable or Probe handle to hot surfaces, that might melt the protective coatings, which in turn could damage the Probe wires and render the Probe inoperable.

You should not bend the tip of any Penetration Probe, as this too could break the wires and render the Probe inoperable. In general, Penetration Probes are designed for penetrating thawed food only and not for testing frozen food or containers or chipping ice.

Probe

You should clean the Probe and wire coil with a clean damp cloth, being VERY careful not to pull or stretch the coil and damage the wires inside.

20th April 2015