Diligence WiFi Air Probe Plus (6m Lead)

Part No: RFAX600PLUS (4828340)

£76.90 (ex. VAT)

The RFAX600PLUS Diligence WiFi Air Probe Plus (High Accuracy ‘Plus’ Specification Thermistor) is a high accuracy damped air probe for use with the RF312GLYCOL and RF312DUALPLUS Diligence WiFi Temperature Data Loggers only.

  • Temperature Range: -40°C to +70°C / -40°F to +158°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: 3.5mm Jack Plug
NEW
RFAX200J+ Diligence WiFi Air Probe Plus

Diligence WiFi Air Probe Plus

The RFAX600PLUS Diligence WiFi Air Probe Plus (High Accuracy ‘Plus’ Specification Thermistor) is a damped high accuracy air probe for use with the RF312GLYCOL and RF312DUALPLUS Diligence WiFi Temperature Data Loggers only. The probe is connected to a 6.0m lead.

 

 

The RFAX600PLUS Diligence WiFi Air Probe Plus is fitted with a 3.5mm Jack Plug connector, to provide a quick and easy connection to your Data Logger.

Note: This Probe is NOT compatible with the RF312-TP Logger. Please click here for probes for that Logger.


Air Probes Explained

It is fair to say, that any probe that can measure temperature, could be used as an Air Probe, with varying degrees of success. However, Air Probes are specifically designed for this purpose and so have a higher degree of accuracy and response.

Air Probes are often designed to be very quick response with a low thermal mass. The sensor is designed to be as small as possible so that the air temperature is transferred to the probe with minimal temperature loss or gain to maintain a high degree of accuracy.

That said, all Comark Air Probes for the RF312xx Diligence WiFi Temperature Data Logger are inherently designed to be slow. Why is this? Read on to find out….

We supply a Damped Air Probe style for the RF312xx Diligence WiFi Temperature Data Logger, which comes in the form of a small stainless steel bullet shaped end, see picture.

RFAX100J_Edit

 

This type of construction has two purposes;

  • It protects the sensor from physical damage
  • It slows the response of the probe down significantly

In certain scenarios, it is beneficial to have a slower response to changes in air temperature, hence having a Damped Air Probe. For example, when you place a probe inside a fridge or freezer, you probably don’t want an alarm going off every time someone opens the door.

The Damped Air Probes do a good job of reflecting the samples in the fridge. As the RF312xx Diligence WiFi Temperature Data Logger is your early warning notification for any alarms, it would be unsuitable if ‘false alarms’ were constantly being raised.

All RF300 Diligence WiFi System Air Probes are fitted with a 3.5mm Jack Plug Connector and a stainless steel Damped Air Probe end, as shown below.

RFJACK_01Damped_Air_Probe_Tip_01

Technical Specifications

NameValue
Lead Length6.0m
Connector Type3.5mm Jack Plug
Sensor TypePST (High Accuracy 'Plus' Specification Thermistor)
Stem Length30mm
Stem Diameter8mm
Temperature Range-40°C to +70°C / -40°F to +158°F
Wire TypeFlat-Twin
Lead MaterialPVA

*You will need to Sign In to view additional content

*You will need to Sign In to view additional content

Part No: RFAX200JPLUS (4380284)

Diligence WiFi Air Probe Plus (2m Lead)

The RFAX200J Diligence WiFi Air Probe Plus is a damped (High Accuracy ‘Plus’ Specification Thermistor) air probe for use with the RF312-TP Diligence WiFi Temperature Data Logger.

  • Temperature Range: -40°C to +70°C / -40°F to +158°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: 3.5mm Jack Plug

Part No: RFPX200JPLUS (4380291)

Diligence WiFi Penetration Probe Plus (2m Lead)

The RFPX200JPLUS Diligence WiFi Penetration Probe Plus is a (High Accuracy ‘Plus’ Specification Thermistor) Penetration Probe for use with the RF312GLYCOL and RF312DUALPLUS Diligence WiFi Temperature Data Loggers.

  • Temperature Range: -40°C to +125°C / -40°F to +257°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: 3.5mm Jack Plug

Part No: RFAX300PLUS (4823853)

Diligence WiFi Air Probe Plus (3m Lead)

The RFAX300PLUS Diligence WiFi Air Probe Plus (High Accuracy ‘Plus’ Specification Thermistor) is a high accuracy damped air probe for use with the RF312GLYCOL and RF312DUALPLUS Diligence WiFi Temperature Data Loggers only.

  • Temperature Range: -40°C to +70°C / -40°F to +158°F
  • Sensor Type: PST (Thermistor)
  • Connector Type: 3.5mm Jack Plug

There are no reviews yet.

Be the first to review “Diligence WiFi Air Probe Plus (6m Lead)”

Keep up to date!

Sign up for our newsletter