Digital Temperature Probe With Boot

Part No: 300B (3058333)

The 300B Digital Temperature Probe has a 1.5mm thin tip for fast response and comes with a protective rubber boot for added protection.

  • Temperature Range: -40°F to 302°F / -40°C to 150°C
  • Thin Tip Probe: 1.5mm
  • Accurate to ±1°C / ±2°F
  • Warranty: 1 Year
NSF Certified Product

Digital Temperature Probe with Boot

The 300B Digital Temperature Probe has a 1.5mm thin tip for fast response and comes with a protective rubber boot for added protection. With large digits it is an easy-to-read and easy-to-use thermometer for quick checks when cooking a range of foods.

There is a hold button on the temperature probe which enables the user to hold the digital reading on the screen while they note a measurement.

The 300B Digital Temperature Probe is also water-resistant.

The 300B Digital Temperature Probe with Boot is a basic reduced (thin) tip Thermometer with Biocote Antimicrobial Protection. The 300B is slim and lightweight, which makes it perfect for slipping into shirt, trouser or apron pockets between use. It has a 127mm / 5″ long stem and a 1.5 mm / 0.6″ diameter then tip, making it suitable for probing thinner foods. The 300B Digital Temperature Probe is field calibratable and features °F/°C switchable temperature scales/ranges, a data hold function and a low battery indicator. You can either use the ON/OFF button to conserve battery life or let the unit automatically shut off after a short time. This Pocket Digital Thermometer includes a protective case with pocket clip and a battery.

The 300B is also available without the Rubber Boot, click here.


Field Calibration Procedures

1. The 300 is only calibratable in a slush ice solution – 60 percent crushed ice to 40 percent tap water – or a water bath. Do not attempt to calibrate in any other manner

2. Immerse the stem of the thermometer to at least half its length in the slush ice solution

3. Wait for the reading to become stable (usually ±2° of 32°F or ±1° of 0°C)

4. Press and hold the CAL button for 8 seconds to begin calibration

5. CAL will be displayed for two seconds and calibration at 0°C / 32°F is completed

6. Remove the thermometer from the ice water and continue to take measurements

Note: CAL will be displayed any time the D-H key is pressed for 8 seconds, but the thermometer will not be re-calibrated unless the tip is inserted in ice water


°F/°C Switchable

The 300B Digital Temperature Probe features °F/°C switchable temperature scales/ranges. With the thermometer turned OFF, press and hold the ON/OFF button. Release when the desired scale is shown.

Note: This is the procedure for any Pocket Digital Thermometer that does not have an °F/°C scale button.

Technical Specifications

NameValue
Temperature Measurement Range-40°C to +150°C / -40°F to +300°F
Scales°C and °F
Accuracy±1°C / ±2°F
Response TimeUnder 6 Seconds
Stem Length127mm / 5"
Probe Tip Diameter1.5mm
CertificationNSF Listed
Battery Type1.5 V Button Cell battery (Part no. AB13; LR44)
Conformance to EU Regulation 1935/2004 ('Framework' Regulation on all Food Contact Materials)Yes
Stem (Shaft) MaterialSUS304 Stainless Steel
Warranty1 Year

*You will need to Sign In to view additional content

Documentation

*You will need to Sign In to view additional content

How-To Videos